<pre id="j37bn"></pre>
      <track id="j37bn"></track>

      <address id="j37bn"></address>

      <thead id="j37bn"><sub id="j37bn"><ol id="j37bn"></ol></sub></thead>

        <progress id="j37bn"><form id="j37bn"></form></progress>

        歡迎您訪福州豐潤電氣有限公司官方網站
        banner
        美國柏勒夫Marsh

         

        Type 110

        Type 110

        產品詳細

        Type 110 Pressure Regulator
        • 高精度調壓閥
        • 豐富的接口可供選擇– 3/8, 1/2, 3/4 和 1 NPT
          (BSPP 和BSPT 也可選擇)
        • 具有自鎖功能
        • 高流量 – 150+ SCFM
        • 高溢流
        • 平衡調壓 
        • 輸出壓力非常穩定
        • 輸出流量非常穩定
        Product Detail:
        The Type 110 combines the proven technology of the Marsh Bellofram Type 10 regulator with the large pneumatic booster of the Type 79 Relay. The result is a precise, crisply responding regulator that can achieve very large forward and exhaust flows. Forward to reverse flow offset is minimized by the capsule operated, servo-control system located in the upper portion of the regulator. This servo-control system supplies a pilot pressure to the large integral pneumatic booster. The large supply and exhaust orifices of the integral booster enable this regulator to produce very high forward and exhaust flow rates. Few regulators can offer this combination of sensitivity and large flow capacity.

        As with all of the Type 10 regulators, the stainless steel measuring capsule is the “heart” of the Type 110 Pressure Regulator. Originally developed for sensitive aircraft altimeters, this precision-sensing element provides the energy to activate the servo-control mechanism. It provides greater regulation and accuracy while eliminating the problems usually encountered with range springs and conventional diaphragms. Because of the balanced supply valve in the integral pneumatic booster, the Type 110 can work with higher supply pressures (250 PSIG) than many other regulators.

        The Type 110 was developed specifically for use with Air Balancing Systems or Zero-Gravity Arms. Such systems require very small forward to reverse flow offsets for smooth operation. The precision regulators that can achieve the sensitivity requirements do not typically possess the forward or exhaust capacity to handle large balancing arms or cylinders. The Type 110 does not have this limitation. It is ideal for use in any application where precise regulation of pressure is required along with high flow or high exhaust capacity.
        Part Numbers:
        P/N
        Port Size
        Pressure Ranges
        psig
        BAR
        960-510-000
        3/8 NPT
        2-25
        0.1-1.7
        960-511-000
        3/8 NPT
        2-50
        0.1-3.5
        960-512-000
        3/8 NPT
        2-110
        0.1-7.6
        960-513-000
        1/2 NPT
        2-25
        0.1-1.7
        960-514-000
        1/2 NPT
        2-50
        0.1-3.5
        960-515-000
        1/2 NPT
        2-110
        0.1-7.6
        960-516-000
        3/4 NPT
        2-25
        0.1-1.7
        960-517-000
        3/4 NPT
        2-50
        0.1-3.5
        960-518-000
        3/4 NPT
        2-110
        0.1-7.6
        960-519-000
        1 NPT
        2-25
        0.1-1.7
        960-520-000
        1 NPT
        2-50
        0.1-3.5
        960-521-000
        1 NPT
        2-110
        0.1-7.6
        For BSPT or BSPP pipe threads, add BSPT or BSPP to the end of the part number. For mounting bracket, order P/N 607-293-000
        Options:
        Consult Factory.
        Cart:

         


        分享到:

         

         

        上一條:Type 10  

        下一條:Type 40

        點擊次數:點擊代碼  更新時間:2011-9-30 20:28:20  【打印此頁】  【關閉

         

         

         

        二維碼

         

        聯系我們 | 網站地圖 Copyright 2016 福州豐潤電氣有限公司 版權所有 | 網站備案/許可證號: 閩ICP備16038147號-1   網站建設信和網絡