<pre id="j37bn"></pre>
      <track id="j37bn"></track>

      <address id="j37bn"></address>

      <thead id="j37bn"><sub id="j37bn"><ol id="j37bn"></ol></sub></thead>

        <progress id="j37bn"><form id="j37bn"></form></progress>

        歡迎您訪福州豐潤電氣有限公司官方網站
        banner
        美國柏勒夫Marsh

         

        Type 1000

        Type 1000

        產品詳細

        產品介紹
         
         
        Type 1000
         
        Type 1000 I/P & E/P Transducers
        • Low Cost
        • Built-in Volume Booster
        • Small Size
        • Field Reversible
        • Low Air consumption
        • Mounts at Any Angle
        • Convenient External Span & Zero Adjusts
          (Except for Explosion Proof Models)
        • Light Weight
        • Wide Supply Pressure Range
        • Low Supply Pressure Sensitivity
        Product Detail:
        The Type 1000 Transducer is an electro-pneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The Type 1000 accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM/339 slpm). Model selections include general purpose, NEMA 4X Type, extended range, high relief, intrinsically safe, and explosion proof.
        Part Numbers:
        T-1000 General Purpose ordering information:
        Input
        Output*
        Part Number
        Impedance
        (nominal)
        psig
        BAR
        4-20mA
        3-9
        0.2-0.6
        961-072-000
        90Ω
        9-15
        0.6-1.0
        961-073-000
        90Ω
        3-15
        0.2-1.0
        961-070-000
        180Ω
        3-27
        0.2-1.9
        961-074-000
        220Ω
        6-30
        0.4-2.1
        961-075-000
        220Ω
        1-17
        0.07-1.2
        961-116-000
        250Ω
        3-15
        0.2-1.0
        961-089-000
        180Ω
        10-50mA
        3-15
        0.2-1.0
        961-076-000
        70Ω
        3-27
        0.2-1.9
        961-077-000
        85Ω
        6-30
        0.4-2.1
        961-078-000
        85Ω
        0-5V
        3-15
        0.2-1.0
        961-079-000
        615Ω
        3-27
        0.2-1.9
        961-080-000
        530Ω
        6-30
        0.4-2.1
        961-081-000
        530Ω
        1-9V
        3-15
        0.2-1.0
        961-085-000
        985Ω
        3-27
        0.2-1.9
        961-086-000
        840Ω
        6-30
        0.4-2.1
        961-087-000
        840Ω
        NOTE: For NEMA4X, add 004 suffix.
        T-1000 extended range ordering information:
        Input
        Output*
        Part Number
        Impedance
        (nominal)
        psig
        BAR
        0-60mA
        2-120
        0.1-8.3
        961-107-000
        220Ω
        4-20mA
        3-120
        0.2-8.3
        961-111-000
        260Ω
        2-60
        0.1-4.1
        961-117-000
        225Ω
        0-10V
        3-120
        0.2-8.3
        961-112-000
        805Ω
        0-5V
        2-60
        0.1-4.1
        961-118-000
        500Ω
        T-1000 HIGH RELIEF ordering information:
        Input
        Output*
        Part Number
        Impedance
        (nominal)
        psig
        BAR
        4-20mA
        3-9
        0.2-0.6
        961-130-000
        90Ω
        9-15
        0.6-1.0
        961-131-000
        90Ω
        3-15
        0.2-1.0
        961-132-000
        180Ω
        3-27
        0.2-1.9
        961-133-000
        220Ω
        6-30
        0.4-2.1
        961-134-000
        220Ω
        3-15
        0.2-1.0
        961-135-000
        180Ω
        1-17
        0.07-1.2
        961-136-000
        250Ω
        10-50mA
        3-15
        0.2-1.0
        961-137-000
        70Ω
        3-27
        0.2-1.9
        961-138-000
        85Ω
        6-30
        0.4-2.1
        961-139-000
        85Ω
        * For output pressures less than 3 psi (0.2 BAR) or greater than 30 psi (21 BAR), the Type 1000 transducer can be coupled to Bellofram Type 75 pneumatic relay. Consult Applications Engineers for further information.
        ** NEMA 4 type enclosure option available on all input/output ranges. This option is separate from explosion proof, NEMA 4 units.

        Type 1000 Explosion Proof
        Input
        Output*
        Part Number
        Impedance (nominal)

        Agency Approvals
        (see notes)

        psig
        BAR
        4-20mA
        3-15
        0.2-1.0
        961-098-000
        180Ω
        Explosion-Proof, Factory Mutual1
        3-15
        0.2-1.0
        961-098-100
        180Ω
        CSA Explosion Proof
        1-9v
        3-15
        20-100
        961-142-000
        985Ω
        Explosion Proof Factory Mutual1
        Type 1000 Intrinsically Safe
        4-20mA 3-15 0.2-1.0 961-099-000
        180Ω
        Intrinsically Safe, Factory Mutual3,4
        3-27 0.2-1.9 961-100-000
        220Ω
        Intrinsically Safe, Factory Mutual3,4
        3-15 0.2-1.0 961-105-000
        180Ω
        Intrinsically Safe, CSA5
        3-27 0.2-1.9 961-106-000
        220Ω
        Intrinsically Safe, CSA5
        6-30 0.4-2.1 961-101-000
        220Ω
        Intrinsically Safe, Factory Mutual3,4
        15-3 1.0-0.2 961-175-000
        180Ω
        Intrinsically Safe, Factory Mutual3,4
        27-3 1.9-0.2 961-176-000
        220Ω
        Intrinsically Safe, Factory Mutual3,4
        30-6 2.1-0.4 961-177-000
        220Ω
        Intrinsically Safe, Factory Mutual3,4
        *For output pressures less than 3 psi or greater than 30 psi the Type 1000 transducer can be coupled to Bellofram Type 75 pneumatic relay.  Consult application engineers for further information.

        Agency Approval Notes:

        1. The Type 1000 Explosion-Proof Transducer has been submitted, tested and approved by Factory Mutual Research for use in hazardous locations for Class I, Division 1, Group D, Class II, Division 1, Groups E, F & G and Class III requirements. It also has been approved to meet NEMA 4 Outdoor requirements.
        2. Canadian Standards Association certified for hazardous locations: Class I, Group D, Class II, Groups E, F and G, Class III, CSA Enc. 4.
        3. Factory Mutual Research Approved as intrinsically Safe for Class I, II, III, Division 1, Groups A, B, C, D, E, G when installed in accordance with interconnection diagram No. 541-000-012 and with the proper energy limiting barriers.
        4. Factory Mutual Research Approved as nonincendive for Class I, Division 2, Groups A, B, C, D, and suitable for Class II and III, Division 2, Group G. Barriers are not required for nonincendive rating.
        5. Canadian Standards Association certified as intrinsically safe when connected through certified diode safety barriers in accordance with Bellofram Installation Instruction 541-000-012.

        Explosion proof, intrinsically safe, and non-incendive ratings are not affected by recalibrating for split range or reverse acting applications.
        The Bellofram T-1000 Transducers were tested and found to comply with Electromagnetic compatibility Directive effective January 1, 1996. The relevant EMC specifications tested were the following: EN 50081-1 (1992) and EN 50082-1 (1992). A Technical Construction File, Serial #107 was written and Certificate of Conformity issued by a Competent Body.

        Options:
        Option Part Number/Last 3 digits
        Explosion Proof Mounting Kit 971-079-000
        Explosion Proof Panel Mounting Kit 971-078-000
        DIN Rail Kit 010-115-000
        Hirschman Connector Kit (3-prong) 971-126-000
        Filter Kit, Coalescing, 0.1 micron 010-140-000
        Filter Element Kit
        (for coalescing filter, package of 10)
        010-141-000
        Output Gauges–Option “8” last 3 digits become - 008
        Dielectric Strength Testing Option “12” last 3 digits become - 012
        NEMA 4X Type Enclosure Option: Option “4” last 3 digits become - 004**
        ** NEMA 4 type enclosure option available on all input/output ranges. This option is separate from explosion proof, NEMA 4 units.

         


        分享到:

         

         

        上一條:沒有了!  

        下一條:Type 1001

        點擊次數:點擊代碼  更新時間:2011-9-30 20:28:20  【打印此頁】  【關閉

         

         

         

        二維碼

         

        聯系我們 | 網站地圖 Copyright 2016 福州豐潤電氣有限公司 版權所有 | 網站備案/許可證號: 閩ICP備16038147號-1   網站建設信和網絡